End Mills  Cobalt End Mills


Jump to your selections or scroll down the page to find your tools

  2 Flute End Mills
  Single End
  Single End Ball Nose
  Double End
  Double End Metric
  Double End Miniature
  Double End Ball Nose "Mini"
  Single End "Mini"
  Single End Ball Nose "Mini"
  Variable Reach
  Variable Reach Ball Nose
  LH Spiral Extended Neck


  All Left Hand Spiral End Mills

  Web Specials
3 Flute End Mills
Tapered
Roughers for Aluminum
Rough/Finish for Aluminum
4 or more Flute End Mills
Single End
Single End LH Spiral
Ball Nose
Ball Nose Metric
Double End
Double End Metric
Double End "Mini"
Single End "Mini"
Heavy Duty
60 High Helix
Fine Pitch Roughers
Fine Pitch LH Roughers
Coarse Pitch Roughers
Coarse Pitch LH Roughers
Roughers for Aluminum
Rough/Finish for Aluminum
Corner Rounders
T-Slot Cutters
Dovetail Cutters
New!! Click here for Minicut International Cutters   


2 Flute SE End Mills
Center Cutting 30 RH Spiral

Uncoated
Series SG-M-All - All Lengths
Series SG-M - Regular Lengths
Series SGX-M - Long Lengths
Tin Coated
Series SG-M-TiN-All - All Lengths
Series SG-M-TiN - Regular Lengths
Series SGX-M-TiN - Long Lengths
TiCN Coated
Series SG-M-TiCN-All - All Lengths
Series SG-M-TiCN - Regular Lengths
Series SGX-M-TiCN - Long Lengths
TiAlN Coated
Series SG-M-TiAlN-All - All Lengths
Series SG-M-TiAlN - Regular Lengths
Series SGX-M-TiAlN - Long Lengths

2 Flute SE BN End Mills
Ball Nose 30 RH Spiral

Uncoated
Series SR-M - Regular Lengths
Tin Coated
Series SR-M-TiN - Regular Lengths
TiCN Coated
Series SR-M-TiCN - Regular Lengths
TiAlN Coated
Series SR-M-TiAlN - Regular Lengths

2 Flute Double End End Mills
Center Cutting 30 RH Spiral

Uncoated
Series DC-M-All - All Lengths
Series XC-M - Stub Lengths
Series DC-M - Regular Lengths
Tin Coated
Series DC-M-TiN-All - All Lengths
Series XC-M-TiN - Stub Lengths
Series DC-M-TiN - Regular Lengths
TiCN Coated
Series DC-M-TiCN-All - All Lengths
Series XC-M-TiCN - Stub Lengths
Series DC-M-TiCN - Regular Lengths
TiAlN Coated
Series DC-M-All - All Lengths
Series XC-M-TiAlN - Stub Lengths
Series DC-M-TiAlN - Regular Lengths

2 Flute Double End Metric End Mills
Center Cutting 30 RH Spiral

Uncoated
Series MDC-M - Regular Lengths
Tin Coated
Series MDC-M-TiN - Regular Lengths
TiCN Coated
Series MDC-M-TiCN - Regular Lengths
TiAlN Coated
Series MDC-M-TiAlN - Regular Lengths

2 Flute Double End "Mini" End Mills
Center Cutting 30 RH Spiral - 3/16" Shanks

Uncoated
Series DCS-PM-ALL - All Lengths
Series XCS-PM - Stub Lengths
Series DCS-PM - Regular Lengths
Series DCX-PM - Long Lengths
Tin Coated
Series DCS-PM-TiN-ALL - All Lengths
Series XCS-PM-TiN - Stub Lengths
Series DCS-PM-TiN - Regular Lengths
Series DCX-PM-TiN - Long Lengths
TiCN Coated
Series DCS-PM-TiCN-ALL - All Lengths
Series XCS-PM-TiCN - Stub Lengths
Series DCS-PM-TiCN - Regular Lengths
Series DCX-PM-TiCN - Long Lengths
TiAlN Coated
Series DCS-PM-TiAlN-ALL - All Lengths
Series XCS-PM-TiAlN - Stub Lengths
Series DCS-PM-TiAlN - Regular Lengths
Series DCX-PM-TiAlN - Long Lengths

2 Flute Double End Ball Nose "Mini" End Mills
30 RH Spiral - 3/16" Shanks

Uncoated
Series FRR-PM-ALL - All Lengths
Series FER-PM - Stub Lengths
Series FRR-PM - Regular Lengths
Series FXR-PM - Long Lengths
Tin Coated
Series FRR-PM-TiN-ALL - All Lengths
Series FER-PM-TiN - Stub Lengths
Series FRR-PM-TiN - Regular Lengths
Series FXR-PM-TiN - Long Lengths
TiCN Coated
Series FRR-TiCN-ALL - All Lengths
Series FER-PM-TiCN - Stub Lengths
Series FRR-PM-TiCN - Regular Lengths
Series FXR-PM-TiCN - Long Lengths
TiAlN Coated
Series FRR-PM-TiAlN-ALL - All Lengths
Series FER-PM-TiAlN - Stub Lengths
Series FRR-PM-TiAlN - Regular Lengths
Series FXR-PM-TiAlN - Long Lengths

2 Flute "Mini" End Mills
Center Cutting 30 RH Spiral - 3/16" Shanks

Uncoated
Series CS-PM-ALL - All Lengths
Series CSS-PM - Stub Lengths
Series CS-PM - Regular Lengths
Tin Coated
Series CS-PM-TiN-ALL - All Lengths
Series CSS-PM-TiN - Stub Lengths
Series CS-PM-TiN - Regular Lengths
TiCN Coated
Series CS-PM-TiCN-ALL - All Lengths
Series CSS-PM-TiCN - Stub Lengths
Series CS-PM-TiCN - Regular Lengths
TiAlN Coated
Series CS-PM-TiAlN-ALL - All Lengths
Series CSS-PM-TiAlN - Stub Lengths
Series CS-PM-TiAlN - Regular Lengths

2 Flute Ball Nose "Mini" End Mills
30 RH Spiral - 3/16" Shanks

Uncoated
Series FR-PM-ALL - All Lengths
Series FRS-PM - Stub Lengths
Series FR-PM - Regular Lengths
Tin Coated
Series FR-PM-TiN-ALL - All Lengths
Series FRS-PM-TiN - Stub Lengths
Series FR-PM-TiN - Regular Lengths
TiCN Coated
Series FR-PM-TiCN-ALL - All Lengths
Series FRS-PM-TiCN - Stub Lengths
Series FR-PM-TiCN - Regular Lengths
TiAlN Coated
Series FR-PM-TiAlN-ALL - All Lengths
Series FRS-PM-TiAlN - Stub Lengths
Series FR-PM-TiAlN - Regular Lengths

2 Flute SE with Variable Reach End Mills (High Speed Machining)
Center Cutting 35 RH Spiral - No Flat

Uncoated
Series SGXL-M - Regular Lengths
Tin Coated
Series SGXL-M-TiN - Regular Lengths
TiCN Coated
Series SGXL-M-TiCN - Regular Lengths
TiAlN Coated
Series SGXL-M-TiAlN - Regular Lengths

2 Flute SE with Variable Reach End Mills (High Speed Machining)
Ball Nose 40 RH Spiral - No Flat

Uncoated
Series SRXL-M - Regular Lengths
Tin Coated
Series SRXL-M-TiN - Regular Lengths
TiCN Coated
Series SRXL-M-TiCN - Regular Lengths
TiAlN Coated
Series SRXL-M-TiAlN - Regular Lengths

M42 Cobalt 2 Flute Extended Neck End Mills
Center Cutting 35 LH Spiral

  
Series 26A  Square End - Extended Neck - All Lengths
Series 26B  Ball Nose - Extended Neck - All Lengths

3 Flute Tapered End Mills
Uncoated
Series TV-M - 1/2° Per Side
Series TV-M - 1° Per Side
Series TV-M - 1-1/2° Per Side
Series TV-M - 2° Per Side
Series TV-M - 3° Per Side
Series TV-M - 4° Per Side
Series TV-M - 5° Per Side
Series TV-M - 6° Per Side
Series TV-M - 7° Per Side
Series TV-M - 10° Per Side
Series TV-M - 15° Per Side
Series TV-M - 20° Per Side
Series TV-M - 25° Per Side
Series TV-M - 30° Per Side
Series TV-M - 45° Per Side
Tin Coated
Series TV-M - 1/2° Per Side
Series TV-M - 1° Per Side
Series TV-M - 1-1/2° Per Side
Series TV-M - 2° Per Side
Series TV-M - 3° Per Side
Series TV-M - 4° Per Side
Series TV-M - 5° Per Side
Series TV-M - 6° Per Side
Series TV-M - 7° Per Side
Series TV-M - 10° Per Side
Series TV-M - 15° Per Side
Series TV-M - 20° Per Side
Series TV-M - 25° Per Side
Series TV-M - 30° Per Side
Series TV-M - 45° Per Side

4 or more Flute SE End Mills
Non Center Cutting 30 RH Spiral

Uncoated
Series SF-M-All - All Lengths
Series SF-M - Regular Lengths
Series SFL-M - Long Lengths
Series SFX-M - Extra Long Lengths
Tin Coated
Series SF-M-All-TiN - All Lengths
Series SF-M-TiN - Regular Lengths
Series SFL-M-TiN - Long Lengths
Series SFX-M-TiN - Extra Long Lengths
TiCN Coated
Series SF-M-All-TiCN - All Lengths
Series SF-M-TiCN - Regular Lengths
Series SFL-M-TiCN - Long Lengths
Series SFX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series SF-M-All-TiAlN - All Lengths
Series SF-M-TiAlN - Regular Lengths
Series SFL-M-TiAlN - Long Lengths
Series SFX-M-TiAlN - Extra Long Lengths

4 or more Flute SE End Mills
Center Cutting 30 RH Spiral

Uncoated
Series JF-M-All - All Lengths
Series JXF-M - Stub Lengths
Series JF-M - Regular Lengths
Series JFM-M - Medium Lengths
Series JFL-M - Long Lengths
Series JFX-M - Extra Long Lengths
Tin Coated
Series JF-M-All-TiN - All Lengths
Series JXF-M-TiN - Stub Lengths
Series JF-M-TiN - Regular Lengths
Series JFM-M-TiN - Medium Lengths
Series JFL-M-TiN - Long Lengths
Series JFX-M-TiN - Extra Long Lengths
TiCN Coated
Series JF-M-All-TiCN - All Lengths
Series JXF-M-TiCN - Stub Lengths
Series JF-M-TiCN - Regular Lengths
Series JFM-M-TiCN - Medium Lengths
Series JFL-M-TiCN - Long Lengths
Series JFX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series JF-M-All-TiAlN - All Lengths
Series JXF-M-TiAlN - Stub Lengths
Series JF-M-TiAlN - Regular Lengths
Series JFM-M-TiAlN - Medium Lengths
Series JFL-M-TiAlN - Long Lengths
Series JFX-M-TiAlN - Extra Long Lengths

M42 Cobalt Multiple Flute SE End Mills
Center Cutting 35 LH Spiral

  
Series 560  Square End - General Purpose - All Lengths
Series 561  Ball Nose - General Purpose - All Lengths

4 & 6 Flute Ball Nose End Mills
Single End 30 RH Spiral

Uncoated
Series RK-M - Regular Lengths
Tin Coated
Series RK-M-TiN - Regular Lengths
TiCN Coated
Series RK-M-TiCN - Regular Lengths
TiAlN Coated
Series RK-M-TiAlN - Regular Lengths

4 Flute Metric End Mills
Ball Nose Single End 30 RH Spiral

Uncoated
Series MRK-M - Regular Lengths
Tin Coated
Series MRK-M-TiN - Regular Lengths
TiCN Coated
Series MRK-M-TiCN - Regular Lengths
TiAlN Coated
Series MRK-M-TiAlN - Regular Lengths

4 Flute Double End End Mills
Non Center Cutting 30 RH Spiral

Uncoated
Series DB-M-All - All Lengths
Series XB-M - Stub Lengths
Series DB-M - Regular Lengths
Tin Coated
Series DB-M-All-TiN - All Lengths
Series XB-M-TiN - Stub Lengths
Series DB-M-TiN - Regular Lengths
TiCN Coated
Series DB-M-All-TiCN - All Lengths
Series XB-M-TiCN - Stub Lengths
Series DB-M-TiCN - Regular Lengths
TiAlN Coated
Series DB-M-All-TiAlN - All Lengths
Series XB-M-TiAlN - Stub Lengths
Series DB-M-TiAlN - Regular Lengths

4 Flute Double End End Mills
Center Cutting 30 RH Spiral

Uncoated
Series JB-M-All - All Lengths
Series JXB-M - Stub Lengths
Series JB-M - Regular Lengths
Tin Coated
Series JB-M-TiN-All - All Lengths
Series JXB-M-TiN - Stub Lengths
Series JB-M-TiN - Regular Lengths
TiCN Coated
Series JB-M-TiCN-All - All Lengths
Series JXB-M-TiCN - Stub Lengths
Series JB-M-TiCN - Regular Lengths
TiAlN Coated
Series JB-M-TiAlN-All - All Lengths
Series JXB-M-TiAlN - Stub Lengths
Series JB-M-TiAlN - Regular Lengths

4 Flute Double End Metric End Mills
Center Cutting 30 RH Spiral

Uncoated
Series MJB-M - Regular Lengths
Tin Coated
Series MJB-M-TiN - Regular Lengths
TiCN Coated
Series MJB-M-TiCN - Regular Lengths
TiAlN Coated
Series MJB-M-TiAlN - Regular Lengths

4 Flute Double End "Mini" End Mills
Center Cutting 30 RH Spiral - 3/16" Shanks

Uncoated
Series DBS-PM-ALL - All Lengths
Series XBS-PM - Stub Lengths
Series DBS-PM - Regular Lengths
Series DBX-PM - Long Lengths
Tin Coated
Series DBS-PM-TiN-ALL - All Lengths
Series XBS-PM-TiN - Stub Lengths
Series DBS-PM-TiN - Regular Lengths
Series DBX-PM-TiN - Long Lengths
TiCN Coated
Series DBS-PM-ALL - All Lengths
Series DBS-PM-TiCN - Stub Lengths
Series DBS-PM-TiCN - Regular Lengths
Series DBX-PM-TiCN - Long Lengths
TiAlN Coated
Series DBS-PM-ALL - All Lengths
Series XBS-PM-TiAlN - Stub Lengths
Series DBS-PM-TiAlN - Regular Lengths
Series DBX-PM-TiAlN - Long Lengths

4 Flute "Mini" End Mills
Center Cutting 30 RH Spiral - 3/16" Shanks

Uncoated
Series FES-PM-ALL - All Lengths
Series FS-PM - Stub Lengths
Series FES-PM - Regular Lengths
Tin Coated
Series FES-PM-TiN-ALL - All Lengths
Series FS-PM-TiN - Stub Lengths
Series FES-PM-TiN - Regular Lengths
TiCN Coated
Series FES-PM-TiCN-ALL - All Lengths
Series FS-PM-TiCN - Stub Lengths
Series FES-PM-TiCN - Regular Lengths
TiAlN Coated
Series FES-PM-TiAlN-ALL - All Lengths
Series FS-PM-TiAlN - Stub Lengths
Series FES-PM-TiAlN - Regular Lengths

4, 6 & 8 Flute Heavy Duty End Mills
Non Center Cutting 30° RH Spiral

Uncoated
Series PLC-M - All Lengths
Tin Coated
Series PLC-M-TiN - All Lengths
TiCN Coated
Series PLC-M-TiCN - All Lengths

TiAlN Coated
Series PLC-M-TiAlN - All Lengths

4, 6 & 8 Flute Heavy Duty End Mills
Center Cutting 30° RH Spiral

Uncoated
Series JFL-M - All Lengths
Tin Coated
Series JFL-M-TiN - All Lengths
TiCN Coated
Series JFL-M-TiCN - All Lengths

TiAlN Coated
Series JFL-M-TiAlN - All Lengths

3 & 4 Flute High Helix Profile End Mills
Center Cutting 60° RH Spiral

Uncoated
Series H-P20 - Regular Lengths
Tin Coated
Series H-PM-TiN - Regular Lengths
TiCN Coated
Series H-PM-TiCN - Regular Lengths
TiAlN Coated
Series H-PM-TiAlN - Regular Lengths

3 & 4 Flute High Helix Profile End Mills
Ball Nose 60° RH Spiral ASP 8.5% POWDERED COBALT

Uncoated
Series H-P20 - Regular Lengths
Tin Coated
Series HR-PM-TiN - Regular Lengths
TiCN Coated
Series HR-PM-TiCN - Regular Lengths
TiAlN Coated
Series HR-PM-TiAlN - Regular Lengths

"Fine Pitch" Knuckle Roughers
Non Center Cutting 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series FKQC-M-All - All Lengths
Series FKQCS-M - Stub and Bridgeport Lengths
Series FKQC-M - Regular Lengths
Series FKQCM-M - Medium Lengths
Series FKQCL-M - Long Lengths
Series FKQCX-M - Extra Long Lengths
Tin Coated
Series FKQC-M-TiN-All - All Lengths
Series FKQCS-M-TiN - Stub and Bridgeport Lengths
Series FKQC-M-TiN - Regular Lengths
Series FKQCM-M-TiN - Medium Lengths
Series FKQCL-M-TiN - Long Lengths
Series FKQCX-M-TiN - Extra Long Lengths
TiCN Coated
Series FKQC-M-TiCN-All - All Lengths
Series FKQCS-M-TiCN - Stub and Bridgeport Lengths
Series FKQC-M-TiCN - Regular Lengths
Series FKQCM-M-TiCN - Medium Lengths
Series FKQCL-M-TiCN - Long Lengths
Series FKQCX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series FKQC-M-TiAlN-All - All Lengths
Series FKQCS-M-TiAlN - Stub and Bridgeport Lengths
Series FKQC-M-TiAlN - Regular Lengths
Series FKQCM-M-TiAlN - Medium Lengths
Series FKQCL-M-TiAlN - Long Lengths
Series FKQCX-M-TiAlN - Extra Long Lengths

"Fine Pitch" Knuckle Roughers
Center Cutting 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series JFKQC-M-All - All Lengths
Series JFKQC-M - Regular Lengths
Series JFKQCL-M - Long Lengths
Tin Coated
Series JFKQC-M-TiN-All - All Lengths
Series JFKQC-M-TiN - Regular Lengths
Series JFKQCL-M-TiN - Long Lengths
TiCN Coated
Series JFKQC-M-TiCN-All - All Lengths
Series JFKQC-M-TiCN - Regular Lengths
Series JFKQCL-M-TiCN - Long Lengths
TiAlN Coated
Series JFKQC-M-TiAlN-All - All Lengths
Series JFKQC-M-TiAlN - Regular Lengths
Series JFKQCL-M-TiAlN - Long Lengths

"Fine Pitch" Knuckle Ball Nose Roughers
Ball End 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series RFKQC-M-All - All Lengths
Series RFKQC-M - Regular Lengths
Series RFKQCL-M - Long Lengths
Tin Coated
Series RFKQC-M-TiN-All - All Lengths
Series RFKQC-M-TiN - Regular Lengths
Series RFKQCL-M-TiN - Long Lengths
TiCN Coated
Series RFKQC-M-TiCN-All - All Lengths
Series RFKQC-M-TiCN - Regular Lengths
Series RFKQCL-M-TiCN - Long Lengths
TiAlN Coated
Series RFKQC-M-TiAlN-All - All Lengths
Series RFKQC-M-TiAlN - Regular Lengths
Series RFKQCL-M-TiAlN - Long Lengths

M42 Cobalt Multiple Flute Fine Pitch Roughers
Center Cutting 30 LH Spiral

  
Square End
Series F560  Uncoated - General Purpose - All Lengths
Ball Nose
Series F561  Uncoated - General Purpose - All Lengths

"Coarse Pitch" Knuckle Roughers
Non Center Cutting 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series KQC-M-All - All Lengths
Series KQCS-M - Stub and Bridgeport Lengths
Series KQC-M - Regular Lengths
Series KQCM-M - Medium Lengths
Series KQCL-M - Long Lengths
Series KQCX-M - Extra Long Lengths
Tin Coated
Series KQC-M-TiN-All - All Lengths
Series KQCS-M-TiN - Stub and Bridgeport Lengths
Series KQC-M-TiN - Regular Lengths
Series KQCM-M-TiN - Medium Lengths
Series KQCL-M-TiN - Long Lengths
Series KQCX-M-TiN - Extra Long Lengths
TiCN Coated
Series KQC-M-TiCN-All - All Lengths
Series KQCS-M-TiCN - Stub and Bridgeport Lengths
Series KQC-M-TiCN - Regular Lengths
Series KQCM-M-TiCN - Medium Lengths
Series KQCL-M-TiCN - Long Lengths
Series KQCX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series KQC-M-TiAlN-All - All Lengths
Series KQCS-M-TiAlN - Stub and Bridgeport Lengths
Series KQC-M-TiAlN - Regular Lengths
Series KQCM-M-TiAlN - Medium Lengths
Series KQCL-M-TiAlN - Long Lengths
Series KQCX-M-TiAlN - Extra Long Lengths

"Coarse Pitch" Knuckle Roughers
Center Cutting 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series JKQC-M-All - All Lengths
Series JKQC-M - Regular Lengths
Series JKQCL-M - Long Lengths
Tin Coated
Series JKQC-M-TiN-All - All Lengths
Series JKQC-M-TiN - Regular Lengths
Series JKQCL-M-TiN - Long Lengths
TiCN Coated
Series JKQC-M-TiCN-All - All Lengths
Series JKQC-M-TiCN - Regular Lengths
Series JKQCL-M-TiCN - Long Lengths
TiAlN Coated
Series JKQC-M-TiAlN-All - All Lengths
Series JKQC-M-TiAlN - Regular Lengths
Series JKQCL-M-TiAlN - Long Lengths

"Coarse Pitch" Knuckle Ball Nose Roughers
Ball End 3, 4 or more Flutes RH 30 Spiral

Uncoated
Series RKQC-M-All - All Lengths
Series RKQC-M - Regular Lengths
Series RKQCL-M - Long Lengths
Tin Coated
Series RKQC-M-TiN-All - All Lengths
Series RKQC-M-TiN - Regular Lengths
Series RKQCL-M-TiN - Long Lengths
TiCN Coated
Series RKQC-M-TiCN-All - All Lengths
Series RKQC-M-TiCN - Regular Lengths
Series RKQCL-M-TiCN - Long Lengths
TiAlN Coated
Series RKQC-M-TiAlN-All - All Lengths
Series RKQC-M-TiAlN - Regular Lengths
Series RKQCL-M-TiAlN - Long Lengths

M42 Cobalt Multiple Flute Coarse Pitch Roughers
Center Cutting 30 LH Spiral

  
Square End
Series R560  Uncoated - General Purpose - All Lengths
Ball Nose
Series R561  Uncoated - General Purpose - All Lengths

"Coarse Pitch" Knuckle Roughers for Aluminum
Center Cutting 3 Flutes RH 40 Spiral 20 Hook

Uncoated
Series AKQC-M-All - All Lengths
Series AKQCS-M - Stub and Bridgeport Lengths
Series AKQC-M - Regular Lengths
Series AKQCM-M - Medium Lengths
Series AKQCL-M - Long Lengths
Series AKQCX-M - Extra Long Lengths
Tin Coated
Series AKQC-M-TiN-All - All Lengths
Series AKQCS-M-TiN - Stub and Bridgeport Lengths
Series AKQC-M-TiN - Regular Lengths
Series AKQCM-M-TiN - Medium Lengths
Series AKQCL-M-TiN - Long Lengths
Series AKQCX-M-TiN - Extra Long Lengths
TiCN Coated
Series AKQC-M-TiCN-All - All Lengths
Series AKQCS-M-TiCN - Stub and Bridgeport Lengths
Series AKQC-M-TiCN - Regular Lengths
Series AKQCM-M-TiCN - Medium Lengths
Series AKQCL-M-TiCN - Long Lengths
Series AKQCX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series AKQC-M-TiAlN-All - All Lengths
Series AKQCS-M-TiAlN - Stub and Bridgeport Lengths
Series AKQC-M-TiAlN - Regular Lengths
Series AKQCM-M-TiAlN - Medium Lengths
Series AKQCL-M-TiAlN - Long Lengths
Series AKQCX-M-TiAlN - Extra Long Lengths

"Medium Pitch" Knuckle Roughers for Aluminum
Center Cutting 3 Flutes RH 40 Spiral 20 Hook

Uncoated
Series AFKQC-M-All - All Lengths
Series AFKQC-M - Regular Lengths
Series AFKQCL-M - Long Lengths
Tin Coated
Series AFKQC-M-TiN-All - All Lengths
Series AFKQC-M-TiN - Regular Lengths
Series AFKQCM-M-TiN - Medium Lengths
TiCN Coated
Series AFKQC-M-TiCN-All - All Lengths
Series AFKQC-M-TiCN - Regular Lengths
Series AFKQCL-M-TiCN - Long Lengths
TiAlN Coated
Series AFKQC-M-TiAlN-All - All Lengths
Series AFKQC-M-TiAlN - Regular Lengths
Series AFKQCL-M-TiAlN - Long Lengths

"Truncated" Rough and Finish for Aluminum
Center Cutting 3 Flutes RH 40 Spiral 20 Hook

Uncoated
Series ATQC-M-All - All Lengths
Series ATQCS-M - Stub and Bridgeport Lengths
Series ATQC-M - Regular Lengths
Tin Coated
Series ATQC-M-TiN-All - All Lengths
Series ATQCS-M-TiN - Stub and Bridgeport Lengths
Series ATQC-M-TiN - Regular Lengths
TiCN Coated
Series ATQC-M-TiCN-All - All Lengths
Series ATQCS-M-TiCN - Stub and Bridgeport Lengths
Series ATQC-M-TiCN - Regular Lengths
TiAlN Coated
Series ATQC-M-TiAlN-All - All Lengths
Series ATQCS-M-TiAlN - Stub and Bridgeport Lengths
Series ATQC-M-TiAlN - Regular Lengths

"Truncated" Rough and Finish for Aluminum
Non Center Cutting 3, 4 or More Flutes RH 30 Spiral

Uncoated
Series TQC-M-All - All Lengths
Series TQC-M - Regular Lengths
Series TQCM-M - Medium Lengths
Series TQCL-M - Long Lengths
Series TQCX-M - Extra Long Lengths
Tin Coated
Series TQC-M-TiN-All - All Lengths
Series TQC-M-TiN - Regular Lengths
Series TQCM-M-TiN - Medium Lengths
Series TQCL-M-TiN - Long Lengths
Series TQCX-M-TiN - Extra Long Lengths
TiCN Coated
Series TQC-M-TiCN-All - All Lengths
Series TQC-M-TiCN - Regular Lengths
Series TQCM-M-TiCN - Medium Lengths
Series TQCL-M-TiCN - Long Lengths
Series TQCX-M-TiCN - Extra Long Lengths
TiAlN Coated
Series TQC-M-TiAlN-All - All Lengths
Series TQC-M-TiAlN - Regular Lengths
Series TQCM-M-TiAlN - Medium Lengths
Series TQCL-M-TiAlN - Long Lengths
Series TQCX-M-TiAlN - Extra Long Lengths

4 Flute Corner Rounders
Uncoated
Series SRC-M - Fractional Radius
Tin Coated
Series SRC-M-TiN - Fractional Radius
TiCN Coated
Series SRC-M-TiCN - Fractional Radius
TiAlN Coated
Series SRC-M-TiAlN - Fractional Radius

Rough & Finish Truncated T-Slot Cutters
8, 10 &12 Flutes

Uncoated
Series TST-M
Tin Coated
Series TST-M-TiN
TiCN Coated
Series TST-M-TiCN
TiAlN Coated
Series TST-M-TiAlN

45° and 60° Dovetail Cutters
Non Center Cutting

Uncoated
Series DT-M - 45°
Series DT-M - 60°
Tin Coated
Series DT-M-TiN - 45°
Series DT-M-TiN - 60°
TiCN Coated
Series DT-M-TiCN - 45°
Series DT-M-TiCN - 60°
TiAlN Coated
Series DT-M-TiAlN - 45°
Series DT-M-TiAlN - 60°









Discount-Tools.com - Quality Cutting Tools for Less!


Customer Service 1-877-848-8665
General Information:info@discount-tools.com
Sales Questions or Quotes:sales@discount-tools.com